This is not a review.  I was not asked to write this post, nor was compensated for it.  I have no affiliations with the Dyson company.  I am just a mom sharing her experience about her vacuum.

When the Dyson company started selling their vacuums I coveted one.  At the time they only had the one model, which you could also get in the ‘animal’ version.

Now there are many models to choose from.  I know, I know, have you seen the price?  Whoa…

I was finally given one as a gift after Baby Sid was born.  I would have chosen a different model, for only one reason.  The handheld hose part.

I have the DC24 Animal, because we are dog people.

 

We don’t have a large house, so this vacuum is great for us.  It is compact and light weight.  Because of the dog, I do have to empty the canister before I am done vacuuming the living room, but that is not a big deal.

My only complaint is that when I want to use the hose I have to take it apart first.

See.  I can’t just pull up the hose and vacuum the cobwebs in the upper corner.  I have to take it apart and put it back together.

This is the only design flaw I have found.  If I had known about it, I might have looked into exchanging it.

 

However none of that has anything to do with what made me fall in love with my vacuum company.

While vacuuming one day it starting to make a bad noise.  I noticed that the noise was coming from this white disk.  It still worked, yep no loss of suction.  It just didn’t work as well as before.

When I covered the circle the sound went away, but then it would come back.  I looked on their support page for help, but couldn’t find an answer.

The support page offers contact information so I decided to write an email as I wanted to send them the above picture explaining what was wrong.

 

I sent them an email at 11:15 a.m.

They replied at 11:21.  The same day.

Yep.  They responded within SIX minutes.

And it wasn’t one of those, ‘we got your email and we will get back to you’ responses.

They answered my question.  And while I know it was a canned response, it was tailored to my problem.  That means someone read my issue and adapted the response to me.

I can’t tell you how impressed I was at the quick response.

Turns out my vacuum was clogged, but not in a place I could easily see.  The email explained how to remove the clog.

 

I vacuumed up the stuff that was clogging my vacuum and it filled the canister.  Twice.

Umm.  Gross.

 

Not only was I impressed with the fact that my vacuumed still worked while clogged, the very quick, very helpful customer service is what really wooed me.

Would I recommend spending that much on a vacuum?  Yes, yes I would.

 

Happy Cleaning

 

Update:

Since I had a few people contact me about Dyson’s response I thought I would let you know what they said.

Look for and remove any blockages from the cleaner head or lower duct hose.
To remove the cleanerhead follow the steps:
Recline the handle of the machine and place handle on the floor.
Locate opening for C-clip on the front of the.
Place flathead screw driver into the opening and lift C-clip straight up to unlock cleanerhead from machine.
Remove cleanerhead from the machine.
Once the cleanerhead is removed inspect the pins on the cleanerhead and the outlet on the main body of the machine for damage or debris.
Reattach the cleanerhead and lock it onto the machine using the C-clip and attempt to vacuum
Instructions for removing the Lower Duct Hose:
1) Unplug your machine from the power outlet
2) Position yourself in front of the machine facing the dust canister
3) To the immediate left of the Ball there is an accordion-like hose that measures roughly 3 inches long
4) Grip the hose in center and pull firmly to the left, away from the machine
5) Once the Hose is disconnected, check for obstructions and remove as necessary
6) Reinstall the hose by using a twisting motion